TeeJet® Granular Components
Datalink
  • Datalink
  • GranSwitchBox
  • hydr control valve


Switchboxes

Single boom or dual boom switchboxes incorporate Off, Auto (On), and Ground Speed Override (GSO) functions into a single unit. Boom sense cables are available for vehicles with built in switches.


Part
Number

Description

Note

405-0075

  Single Conveyor Switchbox with Off/Auot/GSO

w

405-0098

  Dual Boom Switchbox with Off/Auto/GSO - 
  to twin Mid-Tech Connectors

w, x

404-0062

  Switchbox with Off/Auto/GSO

y

404-0050

  Off/Auto/GSO Panel Mount Switch

y

105-0024

  Air-Max Switchbox, Dry only (LH/RH Boom off)

z, w

105-0025

  Air-Max Switchbox with Wet Boom (LH/RH Boom off)

z, w

405-0036

  Boom Status Cable  

Note:

w  -  Incorporates Boom Status Cable.
x   -  Use 402-0040 or 402-0065 to adapt DICKEY-john 360 Slot Sensor
        to this box.
y   -  Use in conjunction with Boom Status Cable.
z   -  Requires special cables. Refer to the Air-Max System.


Application Rate Sensors
Rate sensors are used to measure the speed of the conveyor. Slotted disk sensors can be mounted on a conveyor drive, idler or jackshaft. Inductance type sensors can read from a sprocket or a gear mounted on the conveyor drive or jackshaft. 


Part
Number

Description

Note

16-05000

  Gear Sensor

ff, dd

16-05004

  Gear Sensor with 20' (6.0 m) Cable

aa, dd

120-0009

  360 Slot Application Rate Sensor with 10' (3.0 m) Cable

cc

120-0042

  Inductance Rate Sensor with 9' (2.7 m) Cable

aa, dd

67-00004

  1" Round Shaft Coupler for 120-0009  

Co-Application Components

105-0007

  Chemical Flow Monitor, Alarm Console - 4 Position  

405-0066

  Hopper Level Interface Cable  

600-0056

  12 VDC Motor Assembly with Sensor  

120-0008

  30 Slot Application Rate Sensor - 12' (3.7 m) Cable

ee

120-0008-P

  60 Slot Application Rate Sensor - 12' (3.7 m) Cable

ee

120-0040

  Proximity Sensor with 6' (1.8 m) Cable, Amp Connector

mm

120-0043

  Proximity Sensor with 9' (2.7 m) Cable, Amp Connector

mm

105-0104

  40 Amp Granular Bin Driver Module  

105-0105

  10 Amp Granular Bin Driver Module  

602-0014

  12' Signal Extension Cable  

Hydraulic Motors

28-05004

  Hydraulic Motor with Sensor 300 rpm @ 10 gpm, 7.7 in3/rev. 
  (38 l/min, 126 cm3/rev.)  (Painted Black with Mounting Hardware)

1

600-0060-P

  Hydraulic Motor with Sensor 500 rpm @ 10 gpm, 4.6 in3/rev.
  (38 l/min, 75.4 cm3/rev.)   

1

600-0061-P

  Hydraulic Motor with Sensor 144 rpm @ 10 gpm, 15.9 in3/rev. 
  (38 l/min, 261 cm3/rev.)   

1

 Options

28-10001

  Seal Kit for 28-02005 Hydraulic Motor  

600-0090

  Sensor for above Hydraulic Motors  

Note:

aa    -

  Requires a metal object (i.e. Sprocket Teeth) from which to read pulses. 
  Contact TeeJet.

cc     -

  Does not require an Adapter Cable when used with 404-0061 or 404-0047.

dd    -

  Use with 405-0098 or with Standard Flow Control Cable 404-0022, 
  or with 405-0074 and 405-0174 Power and Flow Control Harnesses.

ff      -

  Requires 45-06114 or 45-05141 Cable.

ee    -

  Use with 105-0104 Driver Module only.

mm   -

  Use with 105-0105 Driver Module only.

1     -

  Manifold mount for EXR IV Hydraulic Control Valves.

Documents
U.S. Catalog 50, page 134
Metric Catalog 50, page 134
For additional information please use the search tool located at the top right.
Please note, some products may not be available in all countries and markets.
Search TeeJet.com

Search Site Pages
Search Technical Documents
Select Language
Where to Buy