AirMatic® AirJet® Sprayer Control
Airmatic Controller
  • Airmatic Controller



AirMatic controller is the key to maintaining consistent droplet size

The AirMatic controller regulates air flow to the AirJet nozzles. It senses changes in the liquid pressure and adjusts air flow accordingly. This enables the system to maintain a consistent droplet size when ground speed and/or application rate changes.

With the AirMatic controller, regulating droplet size is virtually foolproof. The system gives information needed to manage changing conditions.

  • Five droplet size settings. Choose among very fine, fine, medium, coarse, or very coarse droplets. As conditions vary, droplet size can instantly be switched without leaving the sprayer cab or changing spray tips.
  • Alarm mode. When the system detects a variation in liquid pressure beyond the set pressure-to-air relationship, a flashing message on the display alerts the operator to "Drive Slower" or "Drive Faster." Likewise, an "Increase RPM" message will flash if the air compressor is working too slowly.
  • Wind measurement. An optional anemometer measures wind strength and advises the operator when it's too windy to spray.
  • RPM measurement. An optional RPM input measures air compressor speed for on-the-go monitoring of compressor performance.
  • Full compatibility. The AirMatic controller can be used in combination with any TeeJet flow based electronic controller.

Note: Not available in all countries.

System Checklist

Part
Number

Description

65-50004

  Console Mounting Bracket (2 Required)

75-50006

  844-E-5 Console

75-30008

  AirMatic Console

45-05409

  AirMatic Main Cable

51-20010

  Wind Speed Sensor

45-20240

  Main Cable Extension, 13 ft (4 m)

45-20055

  Main Cable, 16 ft (5 m)

45-20006

  Battery Side Power Cable

45-20061

  Spray Side Power Cable, 33 ft (10 m)

78-10002

  Junction Box

90-02177

  801 Flow Meter with 1" Hose Barbs

16-40015

  Proximity Wheel Speed Sensor, 13 ft (4 m)

45-20047

  Pressure Sensor Cable, 20 ft (6 m)
  (2 required)

16-40005

  Pressure Sensor, 150 psi (10 bar)

16-00011

  Pressure Sensor, 36 psi (2.5 bar)

57-10050

  Flow Meter to Junction Box Cable, 13 ft (4 m)

  344BRL-2FS-03C60IC 

  Liquid Regulating Valve

455BEC-2F-C0IU

  Liquid Boom Section Manifold

495BEC-C60IU

  Air Boom Section Manifold

  346BRB-2F-03C60IUC  

  Air Regulating Valve

491BEC-C60IU

  Air Relief Valve

49880A-#-NYB

  AirJet Nozzles (1 for Each Nozzle Position on Sprayer)  


Note:
Air Compressor not available through TeeJet.

Documents
U.S. Catalog 50, page 137
Metric Catalog 50, page 137
pdfAirMatic AirJet_US (590 kb)
Explains the automated system that uses advanced liquid plus air nozzle technology to give the operator the ability to adjust droplet size on-the-go regardless of changes in speed or liquid pressure.
For additional information please use the search tool located at the top right.
Please note, some products may not be available in all countries and markets.
Search TeeJet.com

Search Site Pages
Search Technical Documents
Select Language
Where to Buy