QJS Multiple Nozzle Bodies
  • QJS-B3-MEE
  • QJS-B2-MM
  • QJS-S2-EM
  • QJS-S2-MC

Stackable Nozzle Bodies For Wet and Dry Booms 

  • Multiple outlet, stackable nozzle body is ideal for both pull-type and self-propelled sprayers
  • Wet boom configuration offered with choice of bottom or side inlet in five different boom diameters; dry boom versions also available in three sizes
  • Can be equipped with any combination of TeeJet ChemSaver® tip shutoffs including- pneumatic, electric, manual or
    spring-loaded check valve
  • Choose from one to three outlets in an in-line configuration or up to four outlets in a parallel (tee) configuration
  • Maximum operating pressure of 300 PSI (20 bar)
  • Flow rating of 2.75 gpm (10.4 l/min) at 5 PSI (0.34 bar) pressure drop and 4.0 gpm (15.1 l/min) at 10 PSI (0.7 bar) pressure drop
  • Wetted parts are nylon & Viton


55280 e-ChemSaver®

Electric Solenoid Shutoff

55300 Air ChemSaver
Air Shutoff

58577 ChemSaver

Spring Loaded Shutoff

58140 ChemSaver®

Manual Shutoff
Electrically operated shutoff uses solenoid opened, spring
closed design for extremely fast
remote tip shutoff.
  • ¼ second response time
  • Coil is rated at 12 Volt DC, 7 Watts,
    with 0.75 Amp
    maximum current draw
  • 100 PSI (6.8 bar) maximum
    operating pressure at
    minimum voltage
  • 0.6 gpm (2.27 l/min) at 5 PSI
    (0.34 bar) pressure drop and
    0.8 gpm (3.0 l/min) at 10 PSI
    (0.7 bar) pressure drop
  • Stainless steel and Viton
    wettable parts
  • Optional 58480 mini-DIN cable
    available in various lengths and
    with choice of electrical connectors
  • Normally closed design for safety and reliability
Air opened, spring closed
operationprovides positive
shutoff across wide
operating pressures.
  • Normally closed, piston-style design
  • 150 PSI (10 bar) maximum
    liquid pressure
  • Inlet connection swivels 360 degrees
    and accepts standard
    push-to-connect fittings
  • Materials exposed to air: Viton,
    Kynar® and polypropylene
  • Materials exposed to liquid: Viton, Kynar® and polypropylene
  • Minimum opening air
    pressure of 40 PSI (4.1 bar)
Standard diaphragm check
valve offers a simple,spring
operated design with fixed opening/closing pressure.
  • Wetted parts include Nylon
  • Two-piece check valve and
    collar design with diaphragm
    allows for optimum
  • 10 PSI (0.7 bar) opening pressure
  • Manually operated shutoff
    allows simple, hand operated on/off control at the nozzle body.
  • 150 PSI (10 bar) maximum
    pressure rating
  • With cap in fully open
    (turn counterclockwise) position,
    functions like a standard
    10 PSI (0.7 bar) diaphragm
    check valve
  • With cap in full closed
    (turn clockwise) position,
    all flow through nozzle
    body is shutoff
  • Disengagement spring
    prevents accidental closing of shutoff
  • Nylon and stainless steel construction


For additional information please use the search tool located at the top right.
Please note, some products may not be available in all countries and markets.
Search TeeJet.com

Search Site Pages
Search Technical Documents
Select Language
Where to Buy